LANGUAGE: IT | EN -

Documentation and project samples

Documentation and project samples

Follows some example projects to help the developer to start the design with PHC Studio.
This exaples are loaded in the PHC Studio and visible after lo start up.

PHC Studio application user manual

How programming of the CED400W with the IEC 61131-3 languages.


PHC Studio IDE user manual

How work with the PHC studio integrated development environment.


Project example - Starter kit

Project to use the starter kit.


Project example - Parameter management

Project to use the working parameters inside a PHC Studio application and with the WST (Walvoil Service Tool).


Project example - Read an analog input

How to use the blocks to read the analog inputs.


Project example - Read digital & frequency input

How to use the blocks to read the digital and frequency inputs.


Project example - Drive ON/OFF output

How to use the blocks to control an on/off output.


Project example - Drive PWM output

How to use the blocks to control a proportional (PWM) output.


Project example - Proportional section

How to use the blocks to control a complete proportional section of a directional control valve.


Project example - Proportional section with ramps

How to use the blocks to control a complete proportional section of a directional control valve with the ramp function.


Project example - CANbus

How to use the blocks to control the CANbus network.